Where is the jumper on nvidia biostar tf 560 motherboard to reset the bios...
2007-12-21 09:02:01 · 3 answers · asked by Joe R 1 in Computers & Internet ➔ Hardware ➔ Desktops
It is typically near the CMOS battery. Another way to reset CMOS data of BIOS is by removing the CMOS battery for about 30 seconds.
2007-12-21 09:45:55 · answer #1 · answered by Karz 7 · 0⤊ 0⤋
If your board is a Biostar TF560 A2+ 5.x (5.x is a Version # you'll find listed on the surface of the Motherboard).
Then Go here: http://www.biostar.com.tw/app/en-us/mb/driver.php?S_ID=287
Click on "Manual" link at the top under TF560 A2+ 5.x
Click save, and open, then look under Jumpers in the manual. Follow the instructions to reset the BIOS EXACTLY or you can damage your board, OK. If you cannot do that ask a pro to do it for you.
Wan't easy to find the info...It's on the Tiawan site, not on the US site of Biostar.
http://www.biostar.com.tw/app/en-us/support/download.php
Good Luck.
Also updated drivers are there along w/ everything else...I suggest you download them and burn them to CD including all updated BIOS files for future use...Never know when that stuff will disappear in the future.
2007-12-21 11:17:10 · answer #2 · answered by cglrcng 3 · 0⤊ 0⤋
The jumpers for your computer are on the mother board. You will need the manual for your particular motherboard to know what jumpers are for what and how to set them.
2007-12-21 09:27:24 · answer #3 · answered by yooperjeb2000 1 · 0⤊ 0⤋