2007-12-19 14:05:14 · 11 answers · asked by Sugar Dad 1 in Sports ➔ Outdoor Recreation ➔ Hunting
c-o-c-k (means tilt or get it ready for firing).
This yahoo team is a bunch of @@@@ , so malicious..
2007-12-19 14:07:33 · update #1
No such animule exists.
Even submachine guns that fire from an open bolt have to have the bolt c-o-c-ked for the first shot.
Even with the cheap striker fired jammamatics, chambering the first round, via racking the slide, c-o-c-ks the firing pin.
Doc
2007-12-19 17:09:11 · answer #1 · answered by Doc Hudson 7 · 4⤊ 0⤋
Complicated question. I'll try to simplify: Some semi-automatic pistols (including some .25 acp calibers) have a safety that won't allow them to fire so long as the magazine is not in place. If there is a shell in the chamber these guns are ready to fire as soon as you put the magazine in place. Others won't fire at all unless the magazine is in place. NONE will fire until they have a shell in the chamber. And none should fire simply because you put the magazine in place unless they are defective.
Revolvers are ready to fire as soon as you reload with a speed loader. E-mail me if you have more questions concerning this issue as it may be a safety issue.
Best.
H
2007-12-20 06:29:06 · answer #2 · answered by H 7 · 2⤊ 1⤋
The only weapon you do not need to cycle after loading is a revolver. All other need to have the action worked to place the shell from the mag into the cylinder. I hope this helps and shoot safe.
2007-12-22 00:05:02 · answer #3 · answered by Nightrider 7 · 0⤊ 0⤋
My taurus 850 .38 snub is just a load and shoot revolver. Just push the cylinder release button, load 5 .38 specials, close the cylinder, aim, and pull the trigger. No hammers to cock, slides to cycle, or any of that jazz.
2007-12-20 00:51:12 · answer #4 · answered by super682003 4 · 1⤊ 1⤋
I hope not. That wouldn't be very safe. If the firing pin is in a "******" postion, the chance of it moving forward when the magazine is slammed home is too great to make it worth it.
2007-12-19 22:16:36 · answer #5 · answered by Lou 3 · 0⤊ 1⤋
A double action revolver. Load it pull trigger. 2 down from me said flip up barrel. Tecnially it's being c0cked. All auto's and semis need to be c0cked for the first round.
2007-12-19 22:39:02 · answer #6 · answered by Garfield 5 · 2⤊ 2⤋
bertta makes one and taurs copied it as well, the barrel tilts up from the back to load a 22 or25 direct in the barrel, the hammer is dbl action and the mag is placed in the well like any other pistol, it fires the first shell that was manual implaced then picks up out the mag(no slide ratcheting necessary)my wife wants one.can't remember mdl # chk out IMPACT ARMS UNDER TAURS.
2007-12-19 22:39:36 · answer #7 · answered by Anonymous · 1⤊ 2⤋
The double action semi auto's, you snap in the clip, cycle the slide, release the safety, and pull the trigger....On the last shot, the slide locks open. Pop in another clip, release the slide, and back in business....They come in many calibers, but I have never dealt with the .25's....I don't know if they are double action or not....
2007-12-19 22:21:57 · answer #8 · answered by Pullet Surprise 5 · 2⤊ 3⤋
Revolvers operate that way as do DAO
''double action only'' semi autos.
2007-12-20 00:25:41 · answer #9 · answered by Anonymous · 1⤊ 2⤋
there is such thing as semi-automatic but im not sure if there fully automatic, but heres a link that might help u
2007-12-19 22:18:40 · answer #10 · answered by helping opinion 2 · 0⤊ 6⤋