450 or more at the wheels is pushin it on a stock block,but if the block your using checks out then it will probably be ok but I wouldnt go over 450 to be on the safe side if you can help it.Sure its possible without forced induction.A good setup will get you there and will last if its built right.Your gonna want to raise your compression of course but theres no reason you cant get around 450, I did it with my fox.But I didnt use a stock block,I like the extra insurance.
2007-12-19 10:28:24
·
answer #1
·
answered by Johnny 4
·
1⤊
1⤋
Yes but why,302's and 289's and even to some extent 351w's are better built for torque and trying to achieve a set HP rating proves nothing your better to build a balanced CAR than a beast of a motor,when you build a car that works together motor,tranny,rear diff,and traction it can better apply the HP and torque your making already.
2007-12-21 14:13:04
·
answer #2
·
answered by Big Daddy D 3
·
0⤊
0⤋
If you are going to bore out and increase the stroke, you are changing the engine size. Might as well and get a 351. 1st rule for that amount of power are Deep Pockets. Are you willing to shed tons of $$$$$$$$$ on that? Is that going to be a street car? Is going to be race on the drag strip? Are you going to compete for cash prizes? If is a hobby, I am telling you that is a money pit.
All you are earning are bragging rights and an empty wallet.
2007-12-19 09:26:29
·
answer #3
·
answered by spammer 6
·
1⤊
2⤋
Your maximum suitable wager is putting a supercharger and as lots strengthen as your inventory internals can handle. i think whipple sells a astounding equipment for the gt and makes acceptable around 400rwhp of path you % larger gas injectors, gas pump, maf, a track, the sc equipment and a track yet it somewhat is approximately it is going to value acceptable around 6-8 thousand.
2016-10-08 22:37:20
·
answer #4
·
answered by ? 4
·
0⤊
0⤋
Without a power adder (Nitrous, SC, TC) it well be really expensive. You can get it done, and it would be easier and cheaper to get the boost up.
2007-12-19 12:55:28
·
answer #5
·
answered by MadCowRacer 4
·
0⤊
0⤋
Man you could easily pump out over 500 horse. Its called nitrous and is too easy to install and use...
2007-12-19 07:41:34
·
answer #6
·
answered by Aaron M 3
·
0⤊
3⤋
buy 347 kit,,use trick flow or other aluminum heads..roller cam..should get 500 give r take
2007-12-19 07:46:02
·
answer #7
·
answered by Anonymous
·
1⤊
2⤋
Sure you can, but it wont be as easy and cheap. The torque will be massive, no turbo lag!
2007-12-19 07:45:00
·
answer #8
·
answered by evo741hpr3 6
·
0⤊
2⤋