I replaced shoes on 01 Cacalier and now I needed to replace drums because of noise. One side came right off and I adjusted brake and used new brake clean for new drum. Other side won't budge. I tried hammer ect. Any thoughts. Thank you!
2007-12-18 09:17:35 · 4 answers · asked by Mike S 6 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
i'd recommend rust eater or wd40. after a few hours with that on it, it should come off.
2007-12-18 15:14:12 · answer #1 · answered by Hall + Oates 6 · 0⤊ 0⤋
Take the Parking Brake off...
2007-12-18 11:45:57 · answer #2 · answered by who 5 · 0⤊ 0⤋
The adjuster is probably to tight.Back it way off and hit the hammer on the flange part of the drum.Spray the hub with wd-40 or such.
2007-12-18 09:26:55 · answer #3 · answered by Ronnie Wrench 4 · 1⤊ 0⤋
spray a solvent like wd40 or screw loose--saturate it around the pads use screw driver to try to move break pads-leave it alone for a bit respray it-it will come off with light tapping-you can break drum-might take a few times and a few hours
2007-12-18 09:27:03 · answer #4 · answered by southarkansas 6 · 0⤊ 0⤋