I have 2 cylinders & have destroyed 2 wrenches removing only 3 nipples-one wrench was from Cabelas & the other was from Bass Pro Shop.
2007-12-09 10:30:21 · 3 answers · asked by Stephen B 1 in Sports ➔ Outdoor Recreation ➔ Hunting
I was going to recommend Cabela's...
best you soak the cylinders in penetrating oil for a bit...then with a new wrench try and TIGHTEN the nipple just a little - then remove the nipple: sometimes it helps to get it started.
2007-12-09 12:31:41 · answer #1 · answered by sirbobby98121 7 · 1⤊ 0⤋
May I suggest that once you get your wrench, and have successfully removed the nipples, take a trip to your local auto parts store and buy some anti-seize lubricant. It comes in a tube like toothpaste. Squeeze out a TINY bit onto a Q-tip and lightly coat the threads of each nipple with a thin layer before re-installing. Try not to get any in the cylinder or vent hole in the nipple.
Doing this will save you a LOT of grief should you experience rust on your nipples. They wont be frozen in the cylinder.
2007-12-09 16:42:59 · answer #2 · answered by xqqz_me 6 · 0⤊ 0⤋
Look at www.dixiegun.com or www.trackofthewolf.com. If they don't have it, you don't need it.
2007-12-09 10:40:07 · answer #3 · answered by Anonymous · 1⤊ 0⤋