Do the Contender, Encore, and G2 Barrels interchange with the Pro Hunter ? If not then do any of the models interchange with each other ?
2007-12-09 09:31:59 · 2 answers · asked by answerALL 1 in Sports ➔ Outdoor Recreation ➔ Hunting
I'm a little rusty on TC, but I remember for certain that the encore barrels do not interchange with the contender. I don't know on the others, sorry.
Shoot safe
2007-12-09 10:09:57 · answer #1 · answered by randy 7 · 1⤊ 0⤋
Since the Encore has the scope mounted on the barrel and it comes off with the barrel when you change barrels it should not change zero. Since you are experiencing a change of zero when you change barrels, it sounds to me as if you have a loose mount or the scope is not firmly held in the mount. This would allow the scope to move when you remove the barrel from the frame to replace it with another barrel. Check your scope and mounts to see if they are loose. Another possible problem could accur if you allow oil to get between the rings and the scope. If you apply too much oil to the barrel prior to storing it, the oil will do what oil is designed to do and lubricate the inside of the rings which can allow the scope to move. All of this assumes that you have a separate scope mounted on each barrel. If you are moving your scope from barrel to barrel as you change barrels then that is your problem right there. Each time the scope is removed and replaced on another mount, it will need to be rezeroed. This is not only because the likelyhood of having the scope fit in the new mounts exactly as it did before, but also because the new barrel will shoot to a different zero. Hope this helps.
2016-05-22 08:59:00 · answer #2 · answered by ? 3 · 0⤊ 0⤋