We put a new battery and a new alternator in the car but the tester shows the battery is not charging. The car starts but doesnt charge...Any ideas that might cause this problem??
2007-12-07 15:50:06 · 6 answers · asked by buzzard b8 3 in Cars & Transportation ➔ Car Makes ➔ Ford
Check the maxi-fuse in the underhood fuse block...175 amp, iirc, and have seen them blow before...it doesn't look like a normal fuse, you'll need a test light or dvom to see if you have power on both sides.
2007-12-07 16:03:21 · answer #1 · answered by jim j 3 · 0⤊ 0⤋
See if it has battery voltage at the large cable that mounted on the alternator with a nut.If not,by the side of the fuse block under the hood,under the plastic cover which slide up,there is a fuse link,should have battery voltage at both sides where it is mounted on with the large nuts.
2007-12-07 16:50:12 · answer #2 · answered by CarmaNguyen 7 · 0⤊ 0⤋
in the initiating, dont pay interest to Jr. Mechanic, plugs, wires, and coil all ought to reason a misfire code! 2d, particular the PCM ought to reason this yet very very seldom does a PCM bypass undesirable! is this a three.0 12 valve or 24 valve. you ought to attempt switching wires from a pair diverse cylinders and see if the misfire variations to a various cylinder. additionally there may well be a PCM replace for this challenge. Any questions be happy to ask.
2016-10-10 12:44:25 · answer #3 · answered by ? 4 · 0⤊ 0⤋
you also need to replace the 3 wire plug on the alt a lot of times they lose contact. also check continuity in the power wire from the alt to the batt. I don't think the 01has an external regulator
2007-12-07 15:55:48 · answer #4 · answered by brian d 6 · 0⤊ 0⤋
these cars have an external voltage regulator, I believe it is on the passenger side behind the headlamp
2007-12-07 15:54:47 · answer #5 · answered by Herman 4 · 0⤊ 0⤋
WHERE IS THE MAXIE FUSE
2013-09-24 13:04:33 · answer #6 · answered by Robert Zelenka 1 · 0⤊ 0⤋