Settings 1,2 &3 - nothing happens!
2007-12-03 03:25:19 · 10 answers · asked by Ian M 5 in Cars & Transportation ➔ Car Makes ➔ Ford
Almost certainly the resistor in the switch is shot. (It's supposed to vary the resistance in the circuit as you twiddle the control, thus varying the fan speed.) New switch or try a scrappie.
2007-12-03 03:31:03 · answer #1 · answered by champer 7 · 2⤊ 0⤋
i cant inform you what the reason being devoid of seeing the vehicle yet i'm able to inform you what to hunt for, and what are some issues you may do. one factor you may do is pop the hood and start up it on a similar time as its in park, then record-in for the noise and in case you may narrow down have been the noise is coming from seek for loose bolts close to that section. then turn the vehicle off tighten the bolts and start up the vehicle decrease back up and if the vehicle nonetheless rattles close off the vehicle. verify the spark plugs, if there wiped out and black on the backside replace them. then flow to the carburetor and start up a verify record for that tack it aside sparkling it, replace the broken or Warren down areas, then positioned it decrease back at the same time and then flow to the subsequent area of the engine.
2016-11-13 09:06:33 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Go to a Ford dealership and ask for a blower motor speed resistor.
They should be able to tell you where it is fitted on your model.
If your a tight wad,knowing what you want and where it fits.
Go to a scrap yard.
2007-12-03 04:50:34 · answer #3 · answered by Anonymous · 1⤊ 0⤋
On settings 1 2 or 3 you would have cold hands whilst pushing it.
2007-12-03 04:46:25 · answer #4 · answered by Anonymous · 0⤊ 2⤋
more than likely it's the blower motor resistor. it should be located some where in the heater duct work, just a couple of wires and a couple of screws.
2007-12-03 03:33:08 · answer #5 · answered by geezerrex 5 · 3⤊ 0⤋
hi it must be switch... i have exact same problem with 1998 ford mondeo
2007-12-03 06:10:04 · answer #6 · answered by Anonymous · 0⤊ 1⤋
Buy a new resistor
2007-12-03 05:14:32 · answer #7 · answered by kezo_87 1 · 0⤊ 0⤋
The fan motor, or the control knob is bad.
2007-12-03 14:37:25 · answer #8 · answered by Bill S 6 · 0⤊ 1⤋
i have to agree with the others here i am afraid. :)
2007-12-03 08:10:51 · answer #9 · answered by Friendly-Girlie 2 · 0⤊ 0⤋
i know why.....because it's a ford
2007-12-03 07:15:15 · answer #10 · answered by Nick B 1 · 0⤊ 1⤋