Hello everyone. I receive this camera last christmas as a gift and I had no problems with it, it worked fine and took great pictures...recently though, It's been getting on my nerves. It all started one day when I turned my camera on and the flash was on...this doesen't usually happen. The flash should be OFF unless I tell it to come on. Next I noticed that whenever I took a picture it comes out blurry. A red/green box with a hand below it would appear when I gently depressed the button to take a picture. I assumed this meant I was moving too much, but I can't stand THAT still, it simply won't take a clear picture unless a rare occasion turns up. Any suggestions?
2007-12-03 03:20:00 · 4 answers · asked by Kurtus S 1 in Consumer Electronics ➔ Cameras
Make sure the flash is not set to "Slow sync". This will use a slow shutter speed. You need to use a tripod with this feature for low light condition.
2007-12-03 03:27:49 · answer #1 · answered by TheCat 6 · 0⤊ 0⤋
I believe that some of your settings got changed or lost. I suggest to have a look in the camera manual and then work your way through the menus ( have a look at the flash mode first - as already mentioned before)
2007-12-03 03:33:45 · answer #2 · answered by Martin S 7 · 0⤊ 0⤋
do no longer forge to maintain your digicam thoroughly nevertheless untill you actyally hear the shutter click. it must be you're moving the digicam earlier the photograph is truthfully taken. Aso save your digicam at that's proper or maximum suitable putting. Shoot at 5MP no longer 2 or vga. do no longer sparkling lens that for the period of lots of situations because of the fact the coating might come off.
2016-10-18 23:47:42 · answer #3 · answered by Anonymous · 0⤊ 0⤋
see whether u have got image stabilizer on or off if itz of turn it on!!!
2007-12-03 03:28:16 · answer #4 · answered by Deepak 4 · 0⤊ 0⤋