2007-11-30 05:13:52 · 3 answers · asked by Ron I 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
Me I use a comercial grade 1/2 inch impact gun run by shop air(100 psi).
In a pinch I get out my 3/4 inch breaker bar and a piece of exhaust pipe 6 feet long. The car has to be sitting on the ground for this.
I/2 tools will bend/break when doing these by hand- BE CAREFULL
ASE Cert Auto tech, 95 Neon, 96 T&C, 92 VW GTI16V 2.0L
2007-11-30 15:22:48 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Lots of penetrating oil and a very long cheater bar.
Most of the time you can loosen the hub nut while the car is still on the ground with all 4 tires on the ground. Do it this way for safety.
2007-11-30 13:16:52 · answer #2 · answered by hsueh010 7 · 0⤊ 1⤋
Easiest way to remove it is with a pnuematic impact gun. But the above answer will work if you dont have one
2007-11-30 15:58:41 · answer #3 · answered by cj360trider 2 · 0⤊ 0⤋