how do you load a staple gun?

Answer 1

There should be a release on the left hand side of the head. Or possibly the back. You have to find a release and then put the staples in. It will be on either side normally or a pull out from the back. Just dont do it while its plugged in. Once you release the top will open up or the back will slide out. Load the staples in, shut it and you are good to go.

I thought of a sarcastic response as well but felt it was inappropriate with something that could hurt you. If you are unsure take it to any home depot or lowes and let somebody load it for you.

Answer 2

There should be spring-slot in the bottom of the handle. Just push the little button and remove the spring mechanism. Load it up with a bar of staples and put it back into the staple gun. Simple.

Answer 3

Load:
- Press & squeeze silver latch on back end of stapler
- Pull out tray & place staples inside body of staple gun
To Use:
- After loading with staples, place tip of staple gun into the surface to be stapled
- While applying firm pressure and leaning into the gun, squeeze the trigger to release and propel the staple out of the gun, into the materials to be stapled.

Answer 4

Very carefully after reading the manufacturer's instructions 3 or 4 times.

Answer 5

Dont ask me. I loaded one once and got a staple in my hand.

Answer 6

put the staples into the gun

Answer 7

The bottom of the gun has a spring action loader. Pull it out from the bottom and insert them in.

Answer 8

with staples

Answer 9

Try using both hands.. it works for me!!

Answer 10

if you dont have any instructions..try looking up the brand name on the net...dont shoot your eye out!