I have no money and i want to build a ring
anybody knows how?
2007-11-29 05:03:11 · 10 answers · asked by Anonymous in Home & Garden ➔ Do It Yourself (DIY)
C'mon, he wants a wrestling ring.
Sorry dude, without the money to buy the building materials (like $20 per sheet of plywood, and you would need at least 10) and the skills to do all the assembly, you are out of luck.
You do not want to try practicing move on something that is not built right. If it is not strong enough, it could break under you and hurt you, and if it is too stiff, you could easily be hurt landing on it, just like falling on concrete. Be careful, you don't want to injure yourself out of being a wrestler before you even get started.
2007-11-29 06:16:59 · answer #1 · answered by dedgrimm 3 · 0⤊ 0⤋
What kind of ring are you talking about?
If you mean a ring such as what you wear, I used to make rings out of a number of things- such as bits of copper wire or braided grass.
If you mean a fire ring, if the ground has a lot of rocks in it where you live, there's your building material.
2007-11-29 13:45:53 · answer #2 · answered by Tigger 7 · 0⤊ 0⤋
OK, find a solid silver quarter then take a spoon and start "gently" tapping around the edge of the quarter. don't tap hard enough to warp the quarter. when you have the coin tapped to the band width you like , get a small drill bit and drill a hole in the coin, it's important that you don't press hard enough to warp the coin. then with a round file ,like a chain saw file and start filing out the center. file to finger size, then polish. It makes a beautiful silver band. Remember don't try to rush it, go slow.
2007-11-29 13:22:12 · answer #3 · answered by Anonymous · 0⤊ 0⤋
If you mean an engagement ring, it would be a hard thing to do without money.
2007-11-29 13:08:29 · answer #4 · answered by Shadowburn 3 · 1⤊ 0⤋
Cut off a piece of brass pipe. Get some emery cloth and sand until nice and smooth...
2007-11-29 23:49:10 · answer #5 · answered by Anonymous · 0⤊ 0⤋
A long time ago, kids would take nails and bend them into rings.
2007-11-29 13:24:10 · answer #6 · answered by Anonymous · 0⤊ 0⤋
get a copper pipe,cut off half an inch... and there is your ring
2007-11-29 13:06:18 · answer #7 · answered by Anonymous · 1⤊ 0⤋
use a hole saw cut it out a little bigger than needeed
drill out the middle and sand the fire out of it.
then stain & polyurethene
beautiful
2007-11-29 21:00:40 · answer #8 · answered by ktbug3335 5 · 0⤊ 0⤋
braid some string
2007-11-29 13:11:10 · answer #9 · answered by Anonymous · 0⤊ 0⤋
use a paper clip
2007-11-29 13:06:09 · answer #10 · answered by Socal 2 · 2⤊ 0⤋