2007-11-25 07:05:14 · 4 answers · asked by daloo3101 1 in Cars & Transportation ➔ Car Makes ➔ Ford
I am assuming that you either mean "how to change the odometer from English to Metric"
or you mean " how to change the trip odometer'
There are 2 answers to each of these question depending on whether your vehicle is equipped with a "message center" or not.
******************COPY************
Odometer: Registers the total miles (kilometers) of the vehicle.
• Without Message Center
To switch the display from Metric to
English, press and hold the button
on the cluster for three seconds.
• With Message Center
Refer to Message Center in the
Driver Controls chapter on how to
switch the display from Metric to
English and the odometer to the
speedometer.
Trip odometer: Registers the miles (kilometers) of individual journeys.
• Without Message Center
Press and release the button on the
cluster to toggle between odometer
and trip odometer display. To reset,
press the button again until the trip
reading is 000000.0 miles.
• With Message Center
Press and release the message
center INFO button until “TRIP”
appears in the display (this
represents the trip mode). Press the
control again to select Trip A and
Trip B features. Press and hold the
RESET button for two seconds to
reset.
*********END COPY***********
The above is copied from pages 15-16 of the owners manual.
If you need further information you can download (FREE, courtesy of Fords website) your complete owners manual by clicking here:
http://www.motorcraftservice.com/pubs/content/~WO6CRO/~MUS~LEN/41/06croog2e.pdf
It is inpdf format so you can download it & save it to your computer for future reference.
I hope I understood your question correctly (?) & I hope this helps.
2007-11-26 16:48:05 · answer #1 · answered by Vicky 7 · 5⤊ 0⤋
Like the other's have said, it is illegal to change the odometer reading in the car. If it's broken and needs to be replaced or you changed out the entire instrument cluster, that also needs to be stated on the pinkslip.
Also, I believe that 2006 was the first time they switched to the digital odometer for the Vic.
2007-11-25 15:52:13 · answer #2 · answered by Al A 3 · 0⤊ 0⤋
You have to change the cluster.. and to change cluster you better have a Ford dealer scan tool to do it.... because junk yards won't sell clusters (as it can be used to defraud)
2007-11-25 09:08:28 · answer #3 · answered by gearbox 7 · 0⤊ 0⤋
isn't that illegal?
Change how?
2007-11-25 07:09:14 · answer #4 · answered by Anthony M 6 · 0⤊ 0⤋