At the moment I'm living in Thailand and there are no resources here that has this information.
2007-11-24 22:05:10 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Nissan
Here you go. Motor oil on the head bolt threads couple of drops Tighten all the bolts cross ways circling to the last bolt to 22 ft lbs then tighten all to 43 ft lb loosen all the bolts This step makes sure all the oil is pushed out of the cyl head bolts holes you cleaned and blew out. NOW tighten to 22 ft lbs and if an angle wrench is available 55 degrees if you do not have an angle wrench 43 ft lbs is what nissan says. BUT from personal experence Many GA16 engines apart I torque to 50 foot pounds The 4 little 10mm bolts tighten those to 6 ft pounds. Cam shaft cap bolts 6.7 foot pounds to 8.7 foot lbs.
2007-11-24 22:26:53 · answer #1 · answered by John Paul 7 · 0⤊ 0⤋
http://torquespecs.xoompages.com/sentra_82-94_eng.htm This is your page it gives all the torque values for the whole engine.
2007-11-25 13:05:23 · answer #2 · answered by motorhead,ed 1 · 0⤊ 0⤋
http://torquespecs.xoompages.com/sentra_82-94_eng.htm
2007-11-25 06:08:27 · answer #3 · answered by Anonymous · 0⤊ 0⤋