Transfer Dell XPS hardware into a new case?

Question

I have a Dell XPS from 2003 (the big blue case) that gets extremely hot. If I buy a Cooler Master Stacker 830 case; could I transfer my Dell hardware in there?

Answer 1

You might have trouble getting a perfect fit for the motherboard, but it might work. See if the power supply matches up.

Good luck and Happy Computing!

Answer 2

probable no longer, i would not be shocked if Dell used a BTX case (nonetheless i'm uncertain if BTX existed lower back then). As for it getting warm, how warm does it get? If that is no longer exceeding a hundred °C and it remains working there is incredibly no longer something to rigidity approximately (and that i enormously doubt that is even getting close to to that). you will additionally probable have some difficulty with the skill furnish for the reason that Dell has an stressful tendency of making use of a non time-honored pinout on their PSU's (which will supply you difficulty in case you are trying making use of a time-honored skill furnish).

Answer 3

Probably not, I wouldn't be surprised if Dell used a BTX case (though I'm not sure if BTX existed back then).

As for it getting hot, how hot does it get?

If it isn't exceeding 100 °C and it is still working there's really nothing to worry about (and I highly doubt it's even getting close to that).

You'll also probably have some trouble with the power supply since Dell has an annoying tendency of using a non standard pinout on their PSU's (which will give you trouble if you try using a standard Power Supply).

Answer 4

I'm sorry but Danuitti is wrong. You cannot use that case. All DELL computers use motherboards with either the mini-BTX, BTX, or Extended BTX form factors. The case you want can only support ATX motherboards. They are completely different. The motherboard will not fit, and if it did, the screws and bolts will not line up properly.

Look for a BTX case or a hybrid case that supports both BTX and ATX. Those are usually rare, or bulky, or expensive.