The power on my block went off for two hours today, when I turned the tv on, there is a red light on my sky box, how do I get it off standby. Thank you.
2007-11-10 08:27:41 · 8 answers · asked by Anonymous in Consumer Electronics ➔ TVs
unplug it...wait 30 seconds...plug in...it should work
2007-11-10 08:30:13 · answer #1 · answered by Anonymous · 1⤊ 0⤋
Sounds like to box could be broken. Try unplugging the box for half an hour - if that doesn't work you may have to phone Sky or an Engineer.
2016-04-03 06:09:17 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Usually, I just press my Sky remote button marked TV Guide after turning the unit off for 2 minutes, and then back on.
2007-11-10 08:31:40 · answer #3 · answered by Anonymous · 0⤊ 1⤋
unplug the box for 2 mins
then power it back on , leave it for 2 mins then hit start button
2007-11-10 08:30:31 · answer #4 · answered by Anonymous · 0⤊ 1⤋
take the plug out then press the on and off button and wait till it comes on but dnt be impatient just wait 5 mins
2007-11-10 08:31:39 · answer #5 · answered by ♥mushy brain♥ 3 · 0⤊ 1⤋
unplug the lead on the back for 10 mins and then plug it back in.
it will reset inself but it can take around 20 mins
2007-11-10 08:30:33 · answer #6 · answered by melly 4 · 0⤊ 1⤋
Turn it off at the wall, leave it a few minutes then turn back on. Should all reset and be ok.
2007-11-10 08:30:25 · answer #7 · answered by Sal*UK 7 · 0⤊ 1⤋
turn your television off unplug your sky box and plug it back in this would reset youyr box
2007-11-10 08:36:58 · answer #8 · answered by Anonymous · 0⤊ 1⤋