Can I use an input switcher as a splitter?

Question

Is it possible to reverse a switcher so that I can instead select which T.V. I use? (Hooking up the input to the output and the output to the input.)


The way I would do this is by using male/male cables from the (originally) input to each T.V. and a female/female adapter on the (originally) output to be able to plug in my input.

Another way of putting this question: Does data travel both ways through an input switcher?

Answer 1

It would really have to depend on the switcher itself.

a passive circuit (one that doesn't require electricity) should be simple enough in design that it won't care which direction you're sending the signal, it links one set of plugs (output) to the input. in theory, you should be able to run it in a reverse direction, letting you send a signal to one of two TV's.

however, some switchers have circuitry in it to "boost" a video signal, prevent loss, allow remote control switching, composite/svideo conversion....these may not allow operation in this manner.

the only real way you'd be able to test is to actually buy a unit and test this out.

Answer 2

reckoning on your challenge, you may earnings greater from one than the different. A swap is generally optimal in case you attempt to hook up greater advantageous than one gaming gadget, as a results of fact the percentages are you may no longer be employing those on the comparable time. Splitters are standard once you have greater advantageous than one television you may elect to deliver a piece of (like employing one Blu-ray for 2 televisions). to steer away from overload on your television, maximum retailers will advise a swap.

Answer 3

If your switcher is purely passive. Give it a try.

It won't harm anything, and then you will know.

Answer 4

The A/B/C selector is just a switch. There is not usually any direction so it should work fine.