I have been told there is a way to put a jumper wire between two connections to flash the codes but I need to know which connections to jumper, and exactly where they are located. Thanks in advance for any help.
2007-11-07 10:03:08 · 4 answers · asked by fastang3021sd4 1 in Cars & Transportation ➔ Car Makes ➔ Toyota
even if you can flash the codes on the dash, they will flash by numbers ( how many times it flashes) and you will a book to know what does that code means. so it is easier to go with OBD II
2007-11-08 17:00:57 · answer #1 · answered by john8167 2 · 0⤊ 1⤋
i dont think you can "flash the codes" by counting the blinking lights. the AIRBAG system will work that way - but i dont think the check engine light will (OBDII protocol). harbor freight (tools) has a code reader for 39.99 that will tell you exactly what the code is. you can order it online.
2007-11-08 18:52:29 · answer #2 · answered by Thomas E 6 · 0⤊ 0⤋
there is a way to reset it at the odomoter reset.
I had a hihglander. forget. in the book or any dealer or jiffy lube can reset for you in 30 seconds
2007-11-07 18:10:46 · answer #3 · answered by Michael M 7 · 0⤊ 0⤋
Just go to AutoZone and have it scanned. It's free.
2007-11-07 18:28:44 · answer #4 · answered by SICARIUS 4 · 0⤊ 0⤋