I am removing the drivers side axle shaft on a 2001 dodge grand caravan. Is it supposed to pop out of the transmission like most other axle shafts or do you need to remove the five bolts around the shaft where it goes into the trans. Thanks so much for your help in advance. 3.3L automatic!
2007-11-05 07:12:40 · 4 answers · asked by Allan C 6 in Cars & Transportation ➔ Car Makes ➔ Dodge
it will pop right out you just need to get a pry bar or something behind it and pry a little on it,then it will come out,don't loosen those bolts you,ll drop a gear in to the transmission and have to tear it down ,just pop it out,good luck on it.
2007-11-07 06:31:22 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
Just replaced the half shaft on the passenger side of my '90 Dynasty 3.3, the shaft slid out easily. Good luck.
2007-11-05 13:29:51 · answer #2 · answered by Don't know everything ! 7 · 1⤊ 0⤋
it will pop right out with a prybar. taking the bolts out of the trans behind the axle will let the differential carrier fall over on one side.
2007-11-05 11:24:23 · answer #3 · answered by sprinkles 6 · 0⤊ 0⤋
Sure, if you get your new radio, let me know and I'll give you the different wiring so you know how to connect it. ok?
2016-04-02 06:43:18 · answer #4 · answered by Anonymous · 0⤊ 0⤋