the fuel pump test ok, but no voltage to the fuel pump. can someone help?
2007-11-03 03:43:17 · 6 answers · asked by Scott L 1 in Cars & Transportation ➔ Car Makes ➔ Ford
check the fuel pump cut off safety switch (inertia switch)near the parkbrake pedal.there is a push button on top push it to reset,
also check the power to the dual tank switch if equiped
the wire colors for the inertia switch are brown and pink/black stripe
the fusible link is marked w and has a yellow wire at the starter solenoid
2007-11-03 03:51:10 · answer #1 · answered by doug b 6 · 1⤊ 0⤋
1989 Ford F250 Fuel Pump
2017-01-20 12:49:05 · answer #2 · answered by cuthrell 4 · 0⤊ 0⤋
hi check the relay in the fuse box and the fuse.....If ii am not mistaken the relay for the horn is exactly the same type as the relay for the pump you can swap them over to test......... failing that trace the wire back to the fuse and you may find a small break in the wire.
2007-11-03 03:47:07 · answer #3 · answered by tony b 5 · 1⤊ 0⤋
Get you a schematic and a volt meter and start tracing the fault.
2007-11-03 03:46:37 · answer #4 · answered by jimmymae2000 7 · 0⤊ 0⤋
you have to replace all the cables or check for fuses
2007-11-03 03:48:56 · answer #5 · answered by Anonymous · 0⤊ 2⤋
let someone else professional do it for you
2007-11-03 03:46:21 · answer #6 · answered by Anonymous · 0⤊ 3⤋