the lens qount come out and i neeed the camera for tomorrow!!!! for school it turns on and every thing but the retaded lens wont come out and it pisses me off!!!
2007-11-01 10:12:24 · 6 answers · asked by NATALY L 2 in Consumer Electronics ➔ Cameras
I will guaranteed fixing the lens problem will cost you more than buying a new one. I suggest just buying another camera..
In terms of fixing, just go to a local camera shop they should fix it for you... it's gonna be pricey tho..
2007-11-01 10:30:13 · answer #1 · answered by CeleroSolutions 1 · 1⤊ 0⤋
I had a problem with one like that and it turns out the batteries were very weak. When they drove the motor to bring the lens out they quit and it never moved out. Recharge cured it.
If you have a serious mechanical problem like beach sand caught in there you will not have it solved by tomorrow even if you took it to a camera store (because they typically have a backlog and can take a week or two to get to it).
2007-11-01 11:24:05 · answer #2 · answered by Rich Z 7 · 0⤊ 0⤋
1. Weak batteries
2. Batteries inserted incorrectly (check picture on battery cover)
3. Cheap, non-NiMH or Lithium batteries. (never use "heavy-duty")
4. Rechargable camera needs a full charge.
Usually, if the batteries aren't providing enough power, the camera won't be fully operational.
2007-11-01 12:35:49 · answer #3 · answered by George Y 7 · 0⤊ 0⤋
DID YOU TRY THE CUSTOMER SUPPORT PAGE FOR YOUR
DIGITAL CAMERA....??? TRY DOING THAT....SEE IF THEY HAVE AN EMAIL ADDRESS OR TOLL-FREE 800 NUMBER
FOR DIRECT CUSTOMER SUPPORT HELP...
SOME DIGITAL CAMERA'S HAVE RECHARGEABLE BATTERIES/AN LENS COVER THAT AUTOMATICALLY OPENS WHEN TURNED ON...
SOUNDS LIKE THE MOTOR/SERVO IS JAMMED/DAMAGED.....DID YOU DROP IT/BOUNCE IT...???
IF IT IS STILL UNDER WARRANTY, YOU WILL UNFORTUNATELY, "NEED TO SEND IT OUT/BACK TO THE MANUFACTURER.....!!! REQUEST AN "RMA" FROM THE CUSTOMER SERVICE REP...
2007-11-01 10:33:39 · answer #4 · answered by THE SPECIALIST 2 · 1⤊ 0⤋
Are the batteries in good shape?
2007-11-01 11:21:06 · answer #5 · answered by Anonymous · 0⤊ 0⤋
manufacture service center
2007-11-01 12:02:27 · answer #6 · answered by Elvis 7 · 0⤊ 0⤋