what would cause this truck to not want to back up?we thought carrier bearing,but we changed it and the truck still wont back up.if you try to back it up,it seems like something is holding it back,you have to try a million times to back er up once in a while it will back up but only if you go from drive to reverese quickly over and over.what is wrong?do you think it could be the rear end going out?
2007-10-25 11:32:59 · 5 answers · asked by ? 4 in Cars & Transportation ➔ Car Makes ➔ Ford
the transmission is doing it;s jobyou can hear it kick in and it bogs down.how would one know if the brakes are sticking or something?
2007-10-25 11:50:13 · update #1
check the rear brakes!
2007-10-25 11:42:59 · answer #1 · answered by The Dallas Convicts 3 · 0⤊ 0⤋
Brakes can be checked by putting in reverse and hitting the gas, the parking brakes and shoes on the rear won't hold except so much.
You didn't say manual or automatic but I'm guessing automatic... something could be not holding in the transmission and give you the sign but not want to back up if something isn't holding internally... but something I'm guessing is either not getting enough pressure or not holding...
best to go have it checked out somewheres to make sure
2007-10-25 23:05:17 · answer #2 · answered by gearbox 7 · 0⤊ 0⤋
It sounds to me like there is a servo piston not actuating. It could also be the reverse band out of adjustment. The best thing to do would be to take it to a transmission repair shop and have it pressure checked.
2007-10-25 23:24:14 · answer #3 · answered by littlemule84 2 · 0⤊ 0⤋
I'd say something in the transmission. I had an earlier Ford pickup same thing happened, the reverse band burned out.
2007-10-25 18:41:59 · answer #4 · answered by Anonymous · 0⤊ 0⤋
My guess is the transmission, have it checked out. May need the bands replaced.
good luck
2007-10-25 19:52:19 · answer #5 · answered by Fordman 7 · 0⤊ 0⤋