The problem is I got the front two bolts out and the back two refuse to budge. I WD-40'd it to death, yanked on it with ratchet, nothing works. I broke the socket trying to move it. Its a 15mm.
2007-10-18 13:06:51 · 5 answers · asked by Nick 1 in Cars & Transportation ➔ Car Makes ➔ Ford
using a impact sometimes works but sometimes it actually busts them....
Try a product called PB Blaster. We keep it in the shop for jobs like that and this and another one called acrokrawl (sp) are the only ones we found that will loosen up stuck on stuff... most stuff you buy like WD 40 are like water and are not good at breaking loose stuff.... these two are... try that and maybe get a cheap hand impact... you wack it with a hammer to act like a impact to break it loose.
2007-10-18 16:49:20 · answer #1 · answered by gearbox 7 · 0⤊ 0⤋
the ez jobs are the hardest liquid wrench works good i think better than wd40 first are sure you are removing the right bolts ok than if rusted in then be careful not to striping bolt head work the bolt back and forth by tightening and loosening alittle at a time for sure you do not want to bust the bolt off keep applying liquid wrench air wrench works giving the bolt a sudden snap again be careful are you using 1/2 wrench and use impact socket good luck
2007-10-18 13:42:11 · answer #2 · answered by Lance M 3 · 0⤊ 0⤋
ok it sounds weird but take brake fluid and put some around the top of the bolt, go under the truck and take brake fluid to the bottom of the bolt, let it set to work into the threads. i would use a impact socket and impact wrench (butterfly impacts work really good) you can even buy electric impact guns at home depot or lowes but i would just use a breaker bar and a good size pipe if needed... hope this helps
2007-10-18 19:52:19 · answer #3 · answered by lilblckshdw 2 · 0⤊ 0⤋
Seat bolts are usually installed with Locktite or similiar product from the factory to prevent them from coming loose. You may have to take it to a shop that can use an impact gun on them if you can't loosen them by hand....try using a breaker bar or short piece of pipe on the ratchet for more leverage.
2007-10-18 13:36:29 · answer #4 · answered by paul h 7 · 0⤊ 0⤋
ford get away seats. ranger seats Myself i could flow with a luxurious seat if your having that undesirable of lower back themes - detect a extreme-high quality plush bucket set and placed them in there then placed covers on if mandatory
2016-12-18 11:21:22 · answer #5 · answered by hinokawa 4 · 0⤊ 0⤋