White balance is made up of two colour axies. The temerature axis which is amber (yellow) and blue and the tint axis which is green and magents.
Using daylight film with tungsten lighting will give a yellow cast and using it with fluorescent lighting will give you a green cast.
2007-10-19 04:22:02
·
answer #1
·
answered by Piano Man 4
·
0⤊
0⤋
1
2016-12-20 03:33:32
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
Use an 80B with daylight film in tungsten light. Use an FL-D for fluorescent light.
Used without filters in tungsten light your photos will be reddish orange. In fluorescent light greenish yellow.
2007-10-17 01:11:11
·
answer #3
·
answered by EDWIN 7
·
0⤊
0⤋
Tungsten will be yellow to orange. Fluorescent will usually be green, but can be cyanish, depending on the cycle. You can use the appropriate filter to correct, use balanced film or WB, if digital, or correct during printing.
2007-10-17 04:24:50
·
answer #4
·
answered by Ara57 7
·
1⤊
0⤋
Those types of lighting tend to make things look yellowy. Have you got a daylight filter you could use on the lens?
2007-10-17 01:07:03
·
answer #5
·
answered by Anonymous
·
1⤊
0⤋
This is a color balance thingy. Yous needs to balance your film for the conditions. But generally a yellow cast will ensue - and with candle light.
2007-10-17 01:23:21
·
answer #6
·
answered by bottle babe 4
·
0⤊
0⤋
2
2017-03-09 07:14:09
·
answer #7
·
answered by ? 3
·
0⤊
0⤋
with tungsten lighting you by a special filter and put on your lens - blue filter
2007-10-17 01:12:45
·
answer #8
·
answered by chezzrob 7
·
0⤊
0⤋
Severe color shift to the yellow end of the spectrum.
2007-10-17 01:09:48
·
answer #9
·
answered by Darryl C 1
·
1⤊
0⤋
I don't do other people's Homework.
2016-04-09 11:59:07
·
answer #10
·
answered by Anonymous
·
0⤊
0⤋