i got a 2001 dodge g caravan problems code p0700 and i replaced the input and outpute sensors but still stuck?

Question

2001 dodge grand caravan es
stuck in 2nd gear and changed the input & output sensors and still stuck in the 2nd gear i need help

Answer 1

the p0700 is the code that sets in the pcm when there are codes in the tcm. you need to get the codes read in the tcm to see what is wrong. it could be a solenoid or valve body problem, or internal trans.

Answer 2

Code P0700 basically potential that there is a code stored interior the transmission administration unit. P1684 says that the battery became into disconnected presently. replace the two velocity sensors on the actual of the transmission, they're the vulnerable hyperlink interior the minivan transmissions. you're in 2d kit while you evaluate it quite is "limp-in", which will circulate away whilst the faiult is going away. replace enter and output velocity sensors, common to alter and basically approximately 15-20 dollars apiece.

Answer 3

When anything happens to the trany it goes into what's called 'limp-in'. That means it will still run but will never go out of 2'nd gear into 3'rd until the problem is fixed. Have someone check it out and see what is causing the problem.