Put very warm but not hot water in the sink. Place the mold in the warm water without the water getting to the jell-o and let set 3-5 minutes. Place a plate or platter over the mold tightly and flip. The jell-o should slip right out! (dry the mold before taking it off or you'll get water on the jell-o.)
2007-10-13 09:43:46
·
answer #1
·
answered by Anonymous
·
1⤊
1⤋
Jelly Mold
2016-10-03 07:09:06
·
answer #2
·
answered by menzies 4
·
0⤊
0⤋
Coat the molds with a little oil first. If they still won't come out take the advice given and dip the bottom of the mold in warm water for a bit.
2007-10-13 09:43:52
·
answer #3
·
answered by CFol27 3
·
1⤊
0⤋
Use a flavourless oil like groundnut oil in the molds, only a tiny bit though. It won't change the flavour/colour of the jelly and it will plop out with ease.
2007-10-13 09:45:43
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
A quick dip of the underneath of the mould in very hot water should do the trick, but be careful you don't get any water in the jelly.
2007-10-13 12:35:00
·
answer #5
·
answered by fed up woman 6
·
0⤊
0⤋
Put cling film in the mould then pour the jelly over put in the fridge to set once set hold the mould tight to a plate turn upside down lift up mould and take cling film off works every time for me
2016-04-30 03:29:00
·
answer #6
·
answered by Michael 1
·
0⤊
0⤋
Before you pour the jelly into the mould rinse out mould with some cold water, then pour jelly on, It works for me.
2007-10-13 09:40:16
·
answer #7
·
answered by woody 2
·
1⤊
0⤋
try dipping the moulds in hot water for a few seconds before turning out your jellies. this should work
2007-10-13 09:39:48
·
answer #8
·
answered by Anonymous
·
1⤊
0⤋
If you want tons of ideas on how to eat Paleo, but do it in an exciting delicious manner where you enjoy mouth-watering meals and desserts every single day, you must try out this new Paleo cookbook here https://tr.im/oh3zg
You will really enjoy the meals in there! Plus, you’ll enjoy the improved energy levels, skin health, digestive health, brain clarity, and fat loss too.
2016-02-14 22:21:50
·
answer #9
·
answered by Christena 3
·
0⤊
0⤋
Spray a little Pam or any type of sprayable oil on the molds and you'll see how easily they will slide off!!! : )
2007-10-13 09:44:40
·
answer #10
·
answered by BHH [Bustin' Ho's Heads] 3
·
0⤊
0⤋