how do you program a keyless entry remote control for a 2002 ford focus?
2007-10-12 11:53:22 · 5 answers · asked by Harry S 1 in Cars & Transportation ➔ Car Makes ➔ Ford
If it is a US Focus (European Focus may be different), the directions are in your owners manual (pages 120-121) complete with diagrams.
Here is the FREE link to download your complete owners manual for a (US) 2002 Focus:
http://www.motorcraftservice.com/pubs/content/~WO2FOC/~MUS~LEN/41/02focog4e.pdf
The digital manual is in pdf format & is easily saved to your 'puter for future reference.
2007-10-14 07:29:01 · answer #1 · answered by Vicky 7 · 1⤊ 0⤋
NOTE: Before entering the remote transmitter programming mode, make sure that the vehicle battery is fully charged and that the anti-theft system is not armed or triggered (if equipped).
Close all doors to make sure conflicting chimes do not sound during programming.
Turn the ignition switch from position I to position II four times within six seconds.
Turn the ignition switch to position 0.
A chime sounds and an LED will illuminate to indicate that the learning mode has been accessed and it is possible to program remote transmitters.
Within 10 seconds of the previous step, press any button on the remote transmitter being programmed until a chime is heard and the LED flashes. This indicates a new transmitter code has been successfully received.
After each successful remote transmitter programming, another 10 second learning mode is automatically entered, up to a maximum of four times.
To program additional remote transmitters, repeat step 5.
The system will exit the learning mode if the ignition switch is turned to position III, no new remote transmitter is programmed during the 10 seconds or if four remote transmitters have been programmed.
NOTE: An incorrect programming procedure does not affect the stored codes. After successful programming, only the new programmed remote transmitters will be accepted.
Test all the programmed remote transmitters, by activating and deactivating the remote locking and unlocking functions.
2007-10-12 15:45:25 · answer #2 · answered by rodneyj 3 · 0⤊ 0⤋
Owners manual - if that was even fitted to Focus in 2005 which I don't think it was. Remote central locking perhaps?
2016-05-22 03:29:00 · answer #3 · answered by ? 3 · 0⤊ 0⤋
cycle the inginition 8 times until the doors unlock
2007-10-15 04:56:57 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Has to be done by a dealer. I believe it's got to be plugged in to do it.
2007-10-12 11:56:42 · answer #5 · answered by Anonymous · 0⤊ 1⤋