measuring doors?

Question

i have a screen door and a garage door to replace, how do you measure these to get the right size,rough opening, door itself and for the storm door the door itself or the whole thing, jamb and door?

Answer 1

Normally the door size, as that is what you are replacing.

Answer 2

Interior and exterior doors are NOT STANDARD, in a strict sense. They are sold, in a professional/Trades sense as 2-6/ 2-8....etc...relating to TWO feet plus inches.

Measuring the actual door that needs to be replaced should seem a logical step. At a shop that sells doors you can equate the measurement you took, to the door size as advertised either in packaging or stamped on the door edge; etc.

Obviously too a PRE-HUNG door will equate to the opening to the interior studding, as screen doors pre hung will equate to the frame; minus the door and jamb. You should have no trouble getting face to face advice.

With no offense at all ROUGH isn't at all what one should consider.

You only need to replace a garage door or other door frame; if they are damaged; or if you migt want to change a house passage door to hinge on an opposite side from what currently exists.

Steven Wolf

Answer 3

When you look at the outside of the storm door, you see a little bit of a lip on either side. You measure from the lip to lip for width. As you look up on the storm door, notice there is about an inch up there. Measure from there to the bottom of the door to get the length. The garage door, if you are just replacing the doors, measure just the doors.

Answer 4

If replacing doors only (not jam) then measure the dimensions of the doors -- assuming the fit right now. If you want to replace the jams as well then you would pry off any molding and measure the rough opening the jam fits in to. This is how I would do it.

Answer 5

Things are all pretty standard.
you should measure the door and ask for that size.
things should come close but may need some adjusting since we don't know how old building is from your question but I would say if its under 30 years old its going to be pretty standard and new door frame will fit rough opening.

After reading doc's answer I reread the question and need to say that I was refering to pre hung doors with the above answer ....sorry if I confused anyone.

Answer 6

a thanks to degree a French Door- you get LouiXIV, he's a French Ruler. no matter if it truly is new structure, you degree from one fringe of the outlet to the different, which could were framed for a French Door, and also you degree from the proper, on the header, to the floor, or to the sill, whereever you're basing it. this stuff are available undemanding sizes and the folk at the position the position you get it may inform you a thanks to body it. when you're retrofitting into an latest structure, you should enable them understand that once you order the door because the sizes will be different. Get a Pre-Hung French door and be particular to have a pair of reliable armed associates there with you because the failings are heavy - inquire from me, an old guy who positioned one in with a chum the different day. when you're starting an latest wall, be particular to positioned the perfect header in above the door. Failure to attempt this may damage the completed journey. ascertain that the 2x on the right and left aspect are doubled. it may nicely be one hell of a confusing interest particularly when you're doing it in an older domicile that has settled and ther eis not something sqare no in my domicile except that door.

Answer 7

If you don't know how to measure for the doors, it may be better to have a professional install them. They would know how to measure, and how to install them so they will work OK.