2007-10-11 06:40:53 · 14 answers · asked by Neil Jo M 1 in Computers & Internet ➔ Hardware ➔ Monitors
what's the monitor brand, what's the model, you didn't specified these information!
2007-10-11 06:44:24 · answer #1 · answered by lonley alien 1 · 0⤊ 0⤋
First, make sure that the jack from the speakers is plugged in to the back of the computer.
Then look for a volume control on the right side of the monitor. Right side meaning when looking at the monitor. Usually, as you turn on the speakers there is a clicking sound and then the volume goes up.
Take care,
Troy
2007-10-11 06:46:06 · answer #2 · answered by tiuliucci 6 · 0⤊ 0⤋
If you see a speaker icon at the bottom right of your monitor screen right click the select adjust audio properties,if no icon go to add new programs and add the speakers that way.. Did you have a cd with the monitor and or speakers? you may have to use that - I really tried to get details online but it is all a bit of a jumble so this is the best I can do. Hope some of it works for you.
2007-10-11 06:55:42 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Built in speakers on monitors only work when there is a cable connecting them (normally with a 3.5mm headphone type plug) to the sound card, and unfortuntaly not all monitors come supplied with them
2007-10-11 06:44:41 · answer #4 · answered by AJS 2 · 0⤊ 0⤋
Make sure you have pluged in the wire that goes from the PC to the monitor, it is must of the times located bellow the monitor and it is marked with the word "in" the PC must have as well an "audio out" and the wire must come with the new computer if it doesn´t you find one at the nearest RadioShack.
2007-10-11 06:45:41 · answer #5 · answered by Anonymous · 2⤊ 0⤋
Connect the AUDIO INPUT socket on the monitor to the AUDIO OUTPUT socket on the soundcard of the PC. Most monitors with speakers come with the cable, plus info on where to connect it in the instruction manual
2007-10-11 06:44:13 · answer #6 · answered by stu_the_kilted_scot 7 · 0⤊ 0⤋
first of all connect the hardware using the cable that is provided then you will need to click the icon in the controle pannel and click sounds ect make sure your device has a dirver by cicking on the hardware tab and it should say something audio driver if it isnt there u will have to download a driver and then all u need to do is turn it on on the volume buttons on the screen
2007-10-11 06:50:58 · answer #7 · answered by Floyd U 2 · 0⤊ 0⤋
I have just got a new monitor and there is a button at the front that says volume. If you don't see a volume button, you should have a menu button somewhere. But mine already had the volume turned on on mine, when i plugged it in.
2007-10-11 06:45:24 · answer #8 · answered by Anonymous · 0⤊ 0⤋
There is a cord that goes from the monitor to the green connector on the back of your computer
2007-10-11 06:50:08 · answer #9 · answered by Shanna 1 · 0⤊ 0⤋
The bottom right on your computer screen should have an icon that looks like a speaker. Click on that and you can adjust your volume.
2007-10-11 06:44:37 · answer #10 · answered by stevendlane 1 · 0⤊ 0⤋
Click on start, then control panel, then audio devices. There should be something on there to turn on your sound. Good luck.
2007-10-11 06:45:12 · answer #11 · answered by Anonymous · 0⤊ 0⤋