I could not access wireless internet in my new acer aspire 5570 laptop which has vista ???

Question

I have dell latitude d400 as well, which picks the wireless network (that has old windows / microsoft office). This new acer laptop has windows vista, I dont know how to sort out in vista. Actually acer was set up for a lan (wired connection) at clients office. I dont know how I should to change it suitable for wireless internet. Please explain step by step how to check. Thanks in advance

Answer 1

First - does the Acer have a built in wireless network adapter?

If it does not, you need to buy a pcmcia wireless card, install it and configure it for your LAN.

If it does, then you need to activate it (see your manual that came with your pc) and configure it for your LAN.

To configure for your LAN, first check your manual and notes on the wireless access point's configuration and note the encryption, preshare key, MAC validation, etc. If MAC validation is set up, enter the Acer wireless network MAC address in the list. Once you have done this, open the config on the Acer wireless and configure it with the proper encryption, preshare key, etc as defined on your router. Once this is done you are in business.

Answer 2

particular you have the skill to run residing house windows 7. besides the indisputable fact that there could not be residing house windows 7 drivers for the countless factors. No enormous deal. you need to use the residing house windows Vista drivers in residing house windows 7 which no person that spoke back you pronounced. so a ways as working improve Advidor. That replaced into tremendously intelligent. The improve consultant will inform you what you may to to deal which the difficulty. Imcompatible application is unquestionably an exceedingly moot factor. in lots of casess those progreams will reason and improve to fail, however the classes paintings. they simply have been classes designed for Vista. The fix is effortless. in lots of circumstances you jyst could get rid of this technique. as quickly as you have Vista put in, you may run the installer. some installers are designed to ascertain the OS call or version selection. case in point, residing house windows Vista is techinically residing house windows NT 6.0 jointly as residing house windows 7 is residing house windows NT 6.a million. If the installer is designed for 6.0 it is going to fail in 6.a million. The workaround is effortless. suited click on the installer record and choose residences...then opt for the Compatibility tab. opt for residing house windows Vista contained in the record. i might opt for residing house windows Vista SP1 and click prepare and ok and rerun the installer. you will additionally could do the comparable for the drivers in lots of circumstances. What I commonly do with drivers is locate WinRar or Winzip to extract the kit. Then i pass to the gadget supervisor and particularly some deploy the driving force. only opt for the gadget, pass to the residences, then to the driving force tab and choose replace driving force. Then browse to the folder you extracted the kit. Then enable residing house windows 7 study the information and it will deploy the gadget. Its some extra steps besides the indisputable fact that it extremely is accessible in reachable the place compatibilit mode will possibly not paintings for a common deploy. it extremely is rather difficulty-loose with Printers and scanners surprisingly.