Whenever we push the power button nothing happens. I checked the cord and tried using just batteries and still nothing. I took it apart and I don't see anything obvious. What should I look at next?
2007-10-10 06:59:42 · 10 answers · asked by black_manta@sbcglobal.net 3 in Consumer Electronics ➔ Music & Music Players
There might be a fuse blown, you might check carefully around the area where the batteries / power plug enter the unit to see if there's a fuse. It might be a cylinder wrapped up in a sleeve of some kind with two wires coming out either end.
2007-10-10 07:03:36 · answer #1 · answered by Anonymous · 0⤊ 0⤋
If you are electronic savvy, i would personally try a different switch. it does not matter which kind as long as it as obviously two postitions. (ie on/off) and see if that helps. your pushbutton switch may not function the way its supposed to. if it is not the switch or cord, you may be dealing with a power issue, such as a bad wall socket? Try working around these options to isolate your problem...hope everything works out!
2007-10-10 14:06:50 · answer #2 · answered by jbrown529 2 · 0⤊ 0⤋
maybe the power cord is broken or something. if the power cord is replace try buying a new one. it maybe the power cord
the reason the stereo is not working
2007-10-10 14:03:14 · answer #3 · answered by Evilheat 3 · 0⤊ 0⤋
problem would be the power supply or the switch. Either won't be obvious by looking at it they need to be tested.
2007-10-10 14:03:10 · answer #4 · answered by diehard 1 · 0⤊ 0⤋
theres a possibility something on the circuit board is blown...this happened to one of my stereos, and after trying to fix it i took it to a professional and he said it was dead and could not be fixed
2007-10-10 14:06:35 · answer #5 · answered by Rybo 2 · 0⤊ 0⤋
possibly the on off switch (power button) can you test this with a meter
2007-10-10 14:02:41 · answer #6 · answered by Anonymous · 0⤊ 0⤋
If it has a phone jack , try headphones if it works you might adjust the jack contacts if not it is probably the outputs then take it in for repair.
2007-10-10 14:10:42 · answer #7 · answered by messinger1965 3 · 0⤊ 0⤋
Jump the power switch. It could be defective.
After that who knows.
2007-10-10 14:04:48 · answer #8 · answered by Fred F 7 · 0⤊ 0⤋
go find a place who fixes stereos
2007-10-10 14:24:10 · answer #9 · answered by Anonymous · 0⤊ 0⤋
Buying a new one.
2007-10-10 14:02:49 · answer #10 · answered by Anonymous · 0⤊ 0⤋