How do I set up my Wireless Cisco Linksys router?

Question

I can't get it to work. My brother just bought it. I installed the CD. I have the cables where they're supposed to be... but I think something is up about how all the lights stay on solid... whether the cable ports are empty or not, all the lights are on solid doesn't move from that state. I'm still getting no Internet connectivity. Can you tell me what to do?

Answer 1

First, connect your ethernet cable directly to your PC and make sure you have internet connection.
Then, check the connections again. Sometimes cables aren't where they are supposed to.
If still doesn't work, turn everything off, PC, router and modem. Wait 30 sec. Then turn on the modem first, then the router and finally the PC.
If still doesn't work, call Linksys and they should be able to help you.
Hope this helps!!!

Answer 2

hi Ryder,
if just you could mentioned what series or what numbers that Linksys device you have; it would more helpfull 'cause I can get you better URL link for reference.
But I'll try to help you out as best as I can...
First, you must try to push the RESET button, usually located at the behind or side of the device. Try to push it while you're turning on the device, keep push it for let's say 5 seconds then release.
The device should turn off all of the LED lights, and begin to flash them one by one again.
If this not happening, then your Linksys device is broken and you should ask for replacement from the store/place your brother bought it. Faster is better, because the warranty will not wear off.
Cheers and good luck!

Answer 3

i had the same issue before with this router. sometimes it can be fixed by just reseting the router.the easiest and best way to fix an linksys router reset and installation. linksys is a very smart router and very easy to use . it has a very good and secure system but still sometimes it makes a number of problem if you don't know the basic settings and configration of router .here we will let you know all about linksys and its configuration visit http://linksyscommunity.blogspot.in/ .i hope this will solve your problems.