A. mechanical bender. B. heater box. C. hydraulic bender. D.hand bender.
2007-10-09 06:04:48 · 8 answers · asked by Anonymous in Science & Mathematics ➔ Engineering
B. Heater box
Here is one example:
http://www.ezbend.com/EZ-2%20Series.htm
.
2007-10-09 07:51:33 · answer #1 · answered by tlbs101 7 · 0⤊ 0⤋
What is typically done to "turn corners" with PVC pipe is to use an "elbow." PVC elbows come in a variety of angles and with varying bend radius. The elbow can be glued to a piece of pvc pipe exactly the same way as straight pipes fit together.
2007-10-09 23:23:41 · answer #2 · answered by Johnny D 4 · 0⤊ 0⤋
C. You fill sand tightly into the pipe, gently heat it and bend it uniformly with a hydraulic bender
2007-10-09 13:27:17 · answer #3 · answered by Pandian p.c. 3 · 0⤊ 0⤋
The answer is B a heat box. The conduit must be heated with this or a large torch to get it warm enough to make the bends.
2007-10-09 13:53:23 · answer #4 · answered by Jeffrey S 6 · 0⤊ 0⤋
None of the above , PVC does not bend and requires cutting it and gluing the corner pieces between the straight pipe.
2007-10-09 13:12:56 · answer #5 · answered by BILL 7 · 0⤊ 0⤋
B. heater box.
2007-10-09 17:32:01 · answer #6 · answered by The Answer Man 3 · 0⤊ 0⤋
I would say B.
2007-10-09 13:18:07 · answer #7 · answered by Anonymous · 0⤊ 0⤋
B
2007-10-13 12:48:52 · answer #8 · answered by Curious Cat 3 · 0⤊ 0⤋