Was leaking and using excessive inks, so I tried to clean the pads where the cartirage holder docks (right side).
Put in new ink cartirages and the cartirage holder will not return to docking position.
Green and orange lights blink.
Cartirage holder remains stationery and stays where it is manually put.
Have tried a new USB Cable.
I was careful ... but may have moved something when trying to clean the pads where cartirage holder docks
jam_se@hotmail.com
2007-10-08 17:11:59 · 2 answers · asked by jame_zee 1 in Computers & Internet ➔ Hardware ➔ Printers
Canon Prixma ip3000 Printer
2007-10-08 17:14:29 · update #1
6A00 error comes up
2007-10-10 17:15:14 · update #2
It sounds like the cartridges are not fully seated. Snug them in and then power down the printer and see if it will go through a cleaning cycle and put the holder back into place.
2007-10-08 17:16:16 · answer #1 · answered by Rich Z 7 · 0⤊ 0⤋
Check and see if the cartridge harness is set in place and reset it, turn printer off for 10 seconds to clear the memory do the same with all the cartridges, good luck.
2007-10-08 20:26:11 · answer #2 · answered by carm 5 · 0⤊ 0⤋