how do you develop 120 film?

Question

i want to try to develop 120 film by myself instead of sending it out. could anyone explain the process to me and what i would need in order to develop it?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Another QUESTION:

ok. so lets say i decide to use 35m film. after i get it processed, i've been told i need to scan the negatives myself. can i just use a regular scanner? or what should i use?

Answer 1

1) A light-tight room aka a darkroom or a changing bag

2) Stainless steel developing tank with a 120 stainless steel
reel (there are plastic ones available but not recommended)

3) Chemicals: a) Developer (check the data sheet with your film for what is recommended); b) Stop Bath; c) Fixer; d) Running water for washing the film

4) A film squeegee to remove excess water after hanging the film in a dust-free environment to dry

5) Darkroom thermometer, measuring cups (usually in milliliters) timer

6) Scissors

You will need to practice loading the film on the reel and that is best done, initially, in room light. So you'll have to "sacrifice" a roll. The reel has a spring clip that holds the film. Once you're removed the backing and trimmed the end of the film from the paper that attached it to the spool, grasp the film between thumb and forefinger and "bow" it slightly. Get it firmly placed under the spring clip and, holding it 'bowed", turn the reel counterclockwise and feed the film into the reel. As it "unbows" the film will nestle into the guides of the reel. Practice a few times and then do it with your eyes closed. Place the reel in the developing tank and place the lid on.

In your darkroom or changing bag you have to do what you've done during practice only in total darkness. Once the film is safely in the tank with the lid on you can take it out of the changing bag. Actual processing is done under room light.

When mixing your chemicals temperture is critical. 68 degrees is usually recommended. Time, for developing the film, is also critical. Agitation should be every couple of minutes - gentle agitation. Just turn the tank from top up to top down a few times - slowly.

For printing you'll need an enlarger. There should be quite a selection on ebay or at keh.com or bhphotovideo.com. Make sure you get the right enlarging lens 50mm for 35mm film and 75mm for 120 roll film.

Your local camera store should have a "Darkroom Data Guide" with illustrations. Buy a copy. They can also help you buy everything else you need.

Answer 2

C-41, E-6, or black and white? C-41 is a pain to deal with. E-6 is a little better but still temperamental. B&W is just right...There are enough web resources out there that retyping it here is ludicrous.
Film scanner is the best way to scan. Some flatbeds are getting reasonable results ie. Epson V700/V750 with medium format stock.

Answer 3

maximum one hundred twenty action picture makes use of the comparable technique because of the fact the plenty extra undemanding 35mm action picture. In-keep minilabs can frequently handle the two codecs. only ask around on your section. an option is to scour your close by craigs record for some progression equipment and do your guy or woman arising. BW is amazingly hassle-free to do and not that costly. The negatives would nicely be scanned with maximum classic scanners that contain a unfavorable adapter.