I just got my car paint and theres some clear paint that they use after they paint it.... Some of that clear paint (i dont know the name of it) got into my windshield does anybody know a product that can be use to take this off?
2007-10-05 18:28:31 · 9 answers · asked by Lili 1 in Cars & Transportation ➔ Maintenance & Repairs
Lacquer thinner or acetone, but BE CAREFUL it will take paint off the car too esp if it's a new paint job.
2007-10-05 18:33:11 · answer #1 · answered by JT 3 · 0⤊ 0⤋
do not use any acetone or paint thinner. considering the fact that your paint is sparkling, if any of those chemical compounds come into touch with the exterior this is going to reason it to bubble and peel. in case you employ a razor blade at a 40 5 degree attitude and scrape it off, not decrease, you will not scratch your windshield, A monkey would desire to try this. Use metallic whool and window air purifier after the heavy stuff has been taken off, metallic whool the full area to make optimistic that there isnt even a spec of overspray. this won't scratch your windshield.
2016-10-21 05:02:24 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Take it back to the shop that painted the car and have them remove the clearcoat paint overspray that got on the windshield--they should have done that when they cleaned up the car. We usually use
"000" fine steel wool when our shop needed to remove it. Make sure none of the rest of the car has it on it either or it will have to be buffed off.
2007-10-06 00:20:08 · answer #3 · answered by paul h 7 · 0⤊ 0⤋
A razor blade and Glass cleaner seems to work. Spray the glass cleaner on the over sprayed areas then use the razor blade to scrape it off while still wet.
2007-10-05 18:40:44 · answer #4 · answered by fastdakota4702 1 · 1⤊ 0⤋
Yeah, it's clearcoat over spray this would'nt be an issue if they(painters)would mask the wind shield. But apprently not, fast dakoda has the right idea use amonia(windex).
2007-10-05 20:28:20 · answer #5 · answered by Anonymous · 0⤊ 0⤋
either a razor blade or you may just try good old dot 3 brake fluid carefully applied, it pulls paint off of every thing else, right?
2007-10-05 23:43:07 · answer #6 · answered by mdk68gto, ase certified m tech 7 · 0⤊ 0⤋
a sharp razor blade and some thinners, and a great deal of paitence
2007-10-05 18:33:22 · answer #7 · answered by Anonymous · 1⤊ 0⤋
acetone or paint thinner.....available at local hardware store,s.
2007-10-05 18:34:17 · answer #8 · answered by slipstream 7 · 0⤊ 0⤋
nail polish remover....happened to my friend...it works! :)
2007-10-05 18:31:48 · answer #9 · answered by Anonymous · 0⤊ 0⤋