English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

it all started with the motor going through some very thick mud at very low speeds, water outtake was flowing poorly at one point completley stopped, got water to flow by cleaning the outtake with a bottom bouncer(thin wire), dont know if the power head overheated and caused damage, two weeks later took the boat out it took a while to start and went off then motor started to shake and stalled, kept doing this in forward but in reverse it ran and then after multiple tries and waiting a while the motor ran in forward at low speeds fine. after the initial difficult start it started fine each time when it would stall. was wondering if it could be the water pump or if it is very serious and should get a dealer to look at it. thanks for any info.

2007-10-05 06:29:52 · 1 answers · asked by cbr1000rr 1 in Cars & Transportation Maintenance & Repairs

1 answers

Take it to a dealer to get it flushed out.

2007-10-08 09:44:12 · answer #1 · answered by R1volta 6 · 0 0

fedest.com, questions and answers