i'm doing cross country and some small tricks like wheelie.
important thing for me is speed.
i'm choosing between 2008 shimano deoreXT hub, a2z XC hub
2008 XT hub cost $100 per pair but i'll need a center-lock adaptor which cost $30
a2z hub cost $250 per pair but come with 6bolt.
which one is better for me? is noisy hub or silent hub better?
my country currency is S$1.65 : 1US
2007-10-02 01:25:25 · 5 answers · asked by ivan_up_down 2 in Sports ➔ Cycling
If money wasn't a problem, there are better options than those, like Chris King, Industry 9, Hadley and others. But I really think that the 08 XT hubs are a very good option. They have double the engagement points than 2007 and earlier hubs, which is great if you have to start at the middle of a climb,and overall the engagement is very good (CK, I9 and Hadleys have way more), and they last for a long time if you take care of them properly.
2007-10-02 14:37:52 · answer #1 · answered by Roberto 7 · 0⤊ 0⤋
I had XT Hubs on my old bike and they were fine. I never used the A2Z hubs, but they certainly are light.
In my humble opinion, Chris King makes the ultimate hubs. They are smooth running, and long lasting. Unlike the XT and A2Z hubs, they have regular bearings and are made to be taken apart and serviced. Also, given the design of the hub, they immediately engage when pedaling. There is practically zero rotation of the pedal prior to engagement which makes for a smooth, sure feel. The only downside is the ring drive design of the hub makes it scream when freewheeling. There is no way you'll ever sneak up on someone in a race.
Hope this helps.
2007-10-02 10:32:07 · answer #2 · answered by sfr1224 5 · 0⤊ 0⤋
If speed is your only requirement then the Deore XT hub will be better. The a2z has heavy seals that slow down the hub but have superior protection from dirt.
For even better performance you should consider Phil Wood hubs. Just do a search for Phill Wood.
2007-10-02 09:57:56 · answer #3 · answered by bikeworks 7 · 0⤊ 0⤋
Check the drawing on that deore hub and if it has the axle that is threaded all the way through I wouldn't buy it for off road use.
I kept on hearing this mystery creak in my bike like a sub at 10,000 feet and then sproooooong! Parts flying all over the place when the axle broke. Good thing I was only a mile from the trail head.
2007-10-02 11:06:09 · answer #4 · answered by b4_999 5 · 0⤊ 0⤋
sealed bearings are always better, I would for the XT hubs they are high quality and will last for a long time so go for it
2007-10-02 08:36:14 · answer #5 · answered by G-T Rider 3 · 0⤊ 0⤋