I have no power at all to the radio. changed fuses, checked wires...cant figure out where to go from here. any ideas...thanks
2007-10-01 06:06:29 · 3 answers · asked by Brian V 2 in Cars & Transportation ➔ Car Audio
where would the power fuse be...sorry..kinda novice...ive changed all the tiny fuses, and the main fuse for the radio
2007-10-01 06:12:22 · update #1
kind of hard to diagnose with out being there but if you have a voltage meter, youi can test to see if the
1. constant has power ( usually solid yellow i think) the thing should atleast light up with a time or something.
i would just check and make sure that the ground is soild, and both the constant and the ignition chords are secure those are the only ones that realy control the power to the unit.
if the fusein the back of the radio is good and the cars raido fuse and you can check and actually see that there is power to the unit then you have a bad stero.
also I dont know exactly what type of stero your installing so it may take more stuff. worst case when all the wires are out, hook up the old unit real fast to see if it works.
2007-10-01 06:15:33 · answer #1 · answered by Boston George 3 · 0⤊ 0⤋
Does the radio have an inline fuse holder? may be blown. Test for power at the power wire going to the radio and make sure you have a good ground also. Radio may also have an internal fuse.
http://www.installdr.com/
2007-10-01 13:14:32 · answer #2 · answered by paul h 7 · 0⤊ 0⤋
check the fuse in your power line.
2007-10-01 13:08:48 · answer #3 · answered by shy 4 · 0⤊ 0⤋