2007-09-30 14:13:38 · 2 answers · asked by 13B350Z 1 in Cars & Transportation ➔ Car Makes ➔ Nissan
they do not make a chiltons manuel for my car. i have recentely put tt, pulleys, apexi neo, stage 3 fly and clutch, test pipes, 440 injectors on the car. it ran fine minus your normal hickups now i cant get fuel. i was going to put in wahlboro 255 fuel pump anyway so i did. still no fuel. all fuses are good and tested pump seperately worked fine
2007-09-30 14:37:43 · update #1
Ok make sure your crank angle sensor plug did not become unplugged. That said Looking into the 350Z 2003 service manual. The fuel pump relay is made onto the intelegent power distrubution module. Fuse #81 15 amp. The IPDM is located in that black box next to the battery. The twin turbo we just finished uses 550 cc injectors secondary walbro pump and make over 460 wheel hp with 17 lbs boost it is at the Z-car national convention. Good luck The pump should run for a second then shut off after the engine starts the ECM signals grounds the Fuel pump relay. Black with yellow wire sends power to the pump.
2007-10-01 01:25:43 · answer #1 · answered by John Paul 7 · 0⤊ 0⤋
Stop by your local auto parts/ book store and they should have a repair manual for your car and it will tell you in there.
2007-09-30 21:26:09 · answer #2 · answered by Anonymous · 0⤊ 0⤋