When you slam the breaks, the ABS system periodically releases some of the pressure so that your wheels don't stop spinning (which causes you to skid out of control).
2007-09-29 21:06:21
·
answer #1
·
answered by Wocka wocka 6
·
1⤊
2⤋
classic brakes artwork by ability of forcing brake fluid to the brake pads-you pushing on the pedal pushes the fluid which pushes the brakes-the harder you push, the harder you brake. you could pump classic brakes your self by ability of having on and rancid the brake pedal. that's the form you attempt to keep some steerage administration in slippery circumstances. ABS brakes have a pump equipped into the gadget which will try this for you approximately 5000 situations a minute-lots greater helpful than you're able to do your self. ABS brakes are activated the two by ability of depressing the brake pedal a ways adequate to activate a swap or on some automobiles a working laptop or computing device video exhibit instruments wheel lockup to make certain whilst ABS is mandatory. this is why vehicle manuals inform you to brake very difficult in slippery situations- to make certain that your anti-lock is activated-to make certain the perfect steerage administration and shortest combating distance.
2016-12-17 13:17:01
·
answer #2
·
answered by ? 4
·
0⤊
0⤋
abs system is a box that have 2 lines going in it and end up as 4 lines going out (each iine is going to each tire)
now when u hit the brake pressure would apply to one line and go thru the box and come out as 2 lines and they would go to front driver ,rear passenger . now the others 2 lines would go to front passenger and the second to rear driver ..
that way it would keep ur car straight when u slam on the brake so rear wheeels won't lock and spin the car,
but without abs it would work better at dry surface .
2007-09-29 21:24:14
·
answer #3
·
answered by shadow_relevant03 3
·
0⤊
1⤋
They have wheel speed sensors that tell when tires start to slip (like when a wheel locks). It then pulses the brakes on and off very quickly to keep the tire from sliding. When the tires sliding, you cant use it to turn, or stop as well (in physics its using the coefficient of kinetic friction instead of static friction).
For more info, see www.howstuffworks.com
2007-09-29 21:11:02
·
answer #4
·
answered by Kyle M 6
·
3⤊
1⤋
when you slam on the brake you are still able to turn your car if needed because the brakes dont lock they release air constantly so technically brakes rapidly
2007-09-29 21:12:17
·
answer #5
·
answered by Napkins 2
·
0⤊
6⤋
http://auto.howstuffworks.com/anti-lock-brake.htm This link will answer all of you ABS questions.Best of luck.
2007-09-30 15:39:26
·
answer #6
·
answered by HyperGforce 7
·
1⤊
1⤋
air
2007-09-29 21:04:46
·
answer #7
·
answered by midnitrondavu 5
·
0⤊
6⤋
guess
2007-09-29 22:11:13
·
answer #8
·
answered by Fahad J 1
·
0⤊
6⤋