will this cam sound good and provide great low end tourqe for a chevy 355 with a edelbrock performer carb and manifold
here are the specs
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 600-4,600 RPM
Intake Duration at 050 inch Lift: 206
Exhaust Duration at 050 inch Lift: 214
Duration at 050 inch Lift: 206 int./214 exh.
Advertised Intake Duration: 250
Advertised Exhaust Duration: 258
Advertised Duration: 250 int./258 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.432 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.453 in.
Valve Lift with Factory Rocker Arm Ratio: 0.432 int./0.453 exh. lift
Lobe Separation (degrees): 111
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
Grind Number: CS X4 250H-11
Computer Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
2007-09-28 14:24:52 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Yes.
2007-09-28 14:46:40 · answer #1 · answered by Nigel M 6 · 0⤊ 0⤋
I would go with the 270 Comp Cam or similar
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,800-5,800
Intake Duration at 050 inch Lift: 224
Exhaust Duration at 050 inch Lift: 224
Duration at 050 inch Lift: 224 int./224 exh.
Advertised Intake Duration: 270
Advertised Exhaust Duration: 270
Advertised Duration: 270 int./270 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.470 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.470 in.
Valve Lift with Factory Rocker Arm Ratio: 0.470 int./0.470 exh. lift
Lobe Separation (degrees): 110
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
Grind Number: CS 270H-10
Computer Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Quantity: Sold as a kit.
2007-09-30 18:09:18 · answer #2 · answered by Scott E 2 · 0⤊ 0⤋
A little weak. For a little rumble try between a @ 220-230 duration at @ 050. Lift .470- .490.
2007-09-28 22:25:22 · answer #3 · answered by Bryan W 4 · 0⤊ 0⤋
Read this: http://www.chevyhiperformance.com/techarticles/148_0505_camshaft_basics/index.html
2007-09-28 21:55:29 · answer #4 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋