I am able to connect via SSH.
2007-09-25 20:24:07 · 4 answers · asked by Tom 5 in Computers & Internet ➔ Computer Networking
The PIX 506E contains an integrated configuration utility
called Cisco PIX Device Manager (PDM). PDM is a web
browser-based configuration tool designed to help you set
up, configure, and monitor the PIX Firewall. PDM is
preinstalled on the PIX 506E. To access PDM, make
sure JavaScript and Java are enabled in your web
browser. For best performance, we recommend that
you use Microsoft Internet Explorer 5.5 or a higher
release. Refer to the Cisco PIX Device Manager
Installation Guide for more information on operating
system and web browser environments supported by
PDM.
PDM Version 2.0 and higher releases include a Startup Wizard for initial configuration. Follow these steps
to use the Startup Wizard:
Step 1 If you have not already done so, use an Ethernet cable to connect your PC to the inside port
(Ethernet 1) on the rear panel of the PIX Firewall.
Step 2 Configure your PC to use DHCP (to receive an IP address automatically from the
PIX Firewall) or assign a static IP address to your PC by selecting an address out of the
192.168.1.0 network.
Note The inside interface of the PIX Firewall is assigned 192.168.1.1, so choose a different
IP address.
Step 3 Check the ACT LED on the rear panel of the PIX Firewall (see Table 2 on page 11) to verify
that your PC has basic connectivity to the inside port (Ethernet 1). When connectivity occurs,
the ACT LED next to the port lights up solid green.
Step 4 To access the Startup Wizard, use a PC connected to the inside port and enter the URL
https://192.168.1.1/startup.html into your browser.
Note Remember to add the “s” to “https” or the connection fails. HTTPS (HTTP over SSL)
provides a secure connection between your browser and the PIX Firewall that you are
using PDM to configure or monitor.
Step 5 Do not enter your username or password, just press Enter.
Step 6 Accept the certificates and follow the instructions in the Startup Wizard. For online help, click
the Help button at the bottom of the Startup Wizard window.
2007-09-25 20:38:20 · answer #1 · answered by Taba 7 · 0⤊ 1⤋
Cisco Pix 506e
2016-11-16 06:27:16 · answer #2 · answered by ? 4 · 0⤊ 0⤋
WHAT THE HELL ARE YOU PEOPLE TALKING ABOUT????!!!
TRY
http server enable
http 192.168.1.0 255.255.255.0 inside
2007-09-26 02:12:02 · answer #3 · answered by chris m 3 · 1⤊ 0⤋
i want multiple question and with answer please kindly send me 1000 question it is very important to me
thanking you sir
2007-09-25 20:37:41 · answer #4 · answered by SRIDHAR P 1 · 0⤊ 1⤋