the topper mower is a triple pulley one with gear box linked to the middle pully.it is an skh ithink.its about 20 years old.the bolts holding the pulley and shaft on the right hand side pulled through the metal of the trough area so four bolts complete with blades and pulley wheel and hub smashed to bits and tride to exit through the side of the topper.on inspection the middle pulley and the left one were close to pullin through as well.looks like the bolts were cutin through the metal. what went wrong .and how can i prevent it happening again once ive repaired the topper any ideas .
2007-09-25 09:18:20 · 1 answers · asked by goldie 1 in Cars & Transportation ➔ Maintenance & Repairs
Generaly, out of ballance, or damaged mower blades do the most damage over time than hitting things.
If you start the blades, and you notice a vibration in the deck, you should have the blades serviced.
If you remove them, make sure you get them put back on right. Many spindles have cogs in them that need to be lined up with the blade. Otherwise there will be serious damage that will occur.
2007-09-25 09:36:20 · answer #1 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋