English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

10 answers

It all depends on what conditions you're in. For long casts/ surf fishing, I like spinners, I use a Penn 750, fantastic reel, on a 12' surf rod.
If I'm chucking lures, I prefer bait casters.
For going offshore, I prefer open faced/bait caster designs. I use various Penn models from small ones, up to a 9/0 when going for bigger shark.
As far as durability goes, you get what you pay for. Also, when fishing salt, you must thoroughly clean the reel from salt and sand, otherwise it will corode and become useless.
Just my opinions.

2007-09-24 03:38:53 · answer #1 · answered by hippiewhomper57 3 · 0 0

If you learn how to use a conventional reel to fish the surf with a 10' stick, a conventional is better. Distance wise it's about the same as a spinning reel, the big advantage of a conventional is you could put heavier line on the reel and still cast far. The big drawback with a conventional is if you don't know how to use it well, you'll end up with plenty of bird nest tangled line. By conventional, I am referring to reels like the Penn Squider.

2007-09-25 02:01:08 · answer #2 · answered by mac 7 · 1 0

If durability is a factor (as it should be) I've seen too many spinning reels get their bail "tweaked" so they don't work right. And I've seen plenty of bail rollers get jammed so they don't turn and the line cuts into them and gets scraped up. There are situations where spinning tackle will work better (mainly for smaller fish or when you need huge long casts when surf fishing), but for the most part, revolving-spool reels are the way to go.

The long range boats out of San Diego take people on 3 to 20+ day trips for offshore fish (tuna, yellowtail, wahoo, etc.) ranging from 10 to 200+ pounds. These guys are in the business of taking people fishing and getting them fish, so they don't want tackle which may break down or otherwise not be up to the task. They have tackle recommendations on their websites, and not one of them recommends spinning tackle, even for the light 20-pound rigs.

2007-09-24 09:31:53 · answer #3 · answered by Peter_AZ 7 · 1 0

For beach fishing I use the trusty old Alvey, these are a simple pin centre type reel specifically designed for beach work. Lightweight sturdy and easy to clean. One of the most preferred reels in Australia.

For boat fishing I use an Abu inshore and a penn for off shore/deep sea.

I now buy all well almost all my fishing gear online at auction, it saves me a bundle, although I don't recommend buying beach rods this way, the last one arrived damaged.

I've posted the site if anyones interested

2007-09-27 14:55:32 · answer #4 · answered by Anonymous · 0 0

The general rule of thumb states that conventional reels are stronger.

But today's manufacturing methods and materials make for very tough Spinning reels.

With that said, metal bodies are much stronger than graphite body reels. Graphite reels flex when under extreme stress.

Almost all of the metal reels will corrode (except the titanium bodied reels) but modern finishing techniques mitigate that a bit and regular care (rinsing your reel after your use it) prevent it altogether.

2007-09-26 14:43:11 · answer #5 · answered by sirtanaka 5 · 0 0

For saltwater, I stick with Abu garcia and Penn.
If Im casting lures around, I'll use a baitcaster the Abu Garcia Ambassador.
For surf rods, I use a Penn Spinning reel, and for bigger reels for offshore and other bigger fishing, I'll use a Penn Senator 4/0 or bigger depending on whats needed and what I can afford.

2007-09-24 05:13:07 · answer #6 · answered by Capt. Brad 3 · 1 0

im no expert but a few things i think should be taken into account :sea fishing reels are manafactured using appropiate metals that wont erode with salt,and can reel in certain amounts of sea plantation caught on the line without tangling it up or snapping it,and are built larger in size for accomadating heavier line and more line

2007-09-24 03:06:51 · answer #7 · answered by Anonymous · 0 0

Like Wormist and Brandon suggested, in case you very own a "cheapy" reel the percentages that braid will mess it up are exceptionally sturdy. I even have skill professional 6/20 on my Shimano's & Pflueger's and have had 0 difficulty with it. I esp like skill professional & Stren Braid on my spinning outfit's yet in addition have sturdy success with Berkley Fireline for lighter-handle circumstances. maximum mid-larger point reels ($60 and up), might have a line curler. verify your reel to be sure. 6/20 or 8/30 is your ultimate sizes for many inshore saltwater/freshwater fishing application. To be basic, you will could attempt it for your self. some human beings LOVE braid; some do no longer. it rather is strictly a decision subject. in case you DO come to a decision to circulate the braid course undergo in recommendations: a million. constantly use a Mono or Fluro chief- maximum braids are quite sturdy and could smash your tip-suitable instruction manual in case you get a dangle/snag and are available to a decision your going to "pull it loose". With a frontrunner linked, your chief will smash/cut back long until eventually now your superline will smash! 2. constantly use a quick backing of Mono until eventually now spooling braid- Braid is so sturdy it has a tendency to "slip" on a spool inflicting "dig-in". a quick backing (or fairly tape to guard the line to the spool), is mandatory. 3. great-lines are VERY limp- because of the fact Braid is so "limp" it has an inclination to create wind knots & twist truthfully. it rather is substantial to "take care of your line" after each 5-6 forged. sturdy success.

2016-10-05 06:44:00 · answer #8 · answered by ? 4 · 0 0

for see fishing i use an abu multiplier they generally can cope with all types of shore work and some boat work using a 10000 size

2007-09-24 05:03:48 · answer #9 · answered by Anonymous · 1 0

i prefer a PENN # 9 peerless for most all of my outings
salty or fresh

2007-09-26 12:45:23 · answer #10 · answered by coolbreezex3 2 · 0 0

fedest.com, questions and answers