This is the first dresser that I have built. The drawers are meant to close on rollers like kitchen cabinets do. I built a box first and then have a drawer face that I want to attach to that box, but the drawer doesnt close squarely. How do I fix this so that the drawer will close and the drawer face will be flush to the dresser frame?
2007-09-23 03:23:04 · 5 answers · asked by Bow_Newby 1 in Home & Garden ➔ Do It Yourself (DIY)
If you used gliders, adjust the back of them, left or right. If it you built your own rails, then it may not be square. Maybe you can adjust that.
2007-09-23 03:39:46 · answer #1 · answered by robling_dwrdesign 5 · 0⤊ 0⤋
It sounds like you just need to adjust the rollers. Check your drawer for square and your face is flush to the drawer. Most slides have adjustment capability.
2007-09-23 06:22:46 · answer #2 · answered by ~Seamaster~ 3 · 0⤊ 0⤋
Could be the box or the drawer out of square. You need to determine what is out of square and make it so.
I make a template on my work surface for drawers when gluing and fastening corners. Depends on your joining method at corners to give you a decent answer.
2007-09-23 03:44:11 · answer #3 · answered by Anonymous · 0⤊ 0⤋
With no offense meant, and assuming you installed roller TRACK as well; I have to assume that the drawer is OUT OF SQUARE. OR... that the tracks/or rollers; are not exact on opposing sides.
Steven Wolf
2007-09-23 03:45:12 · answer #4 · answered by DIY Doc 7 · 0⤊ 0⤋
Night Stand
2016-04-05 21:32:51 · answer #5 · answered by Anonymous · 0⤊ 0⤋