I have read many reviews online and my stepfather thinks Dewalt is better. Many people on the internet say one or the other for the majority. Any recommendations from people who have used these brands?
2007-09-22 03:19:24 · 13 answers · asked by Julius M 1 in Home & Garden ➔ Do It Yourself (DIY)
I prefer Dewalt, but I don't think I have ever owned any Hitachi tools. I guess I can't give you an opinion on the Hitachi.
2007-09-22 03:54:01 · answer #1 · answered by Parercut Faint 7 · 0⤊ 0⤋
Dewalt in this case and I'm not even a big yellow fan. The Hitachi miter gauge is basically a riveted sticker. Check out the gauge on the Dewalt. That alone seals the deal in my mind. Hitachi makes solid tools, but their 10" miter saws seem a bit cheesy. The fence and base seem a bit wimpy. Hitachi pneumo nailers are fantastic, however.
I still use an old Ryobi with a home made fence. The thing cuts true and accurate, what else do I need? Miter saws are all very similar these days. Bosch tries to be a bit innovative, but they're too freaking expensive for what they do. Stay away from Harbor Freight junk and the extreme cheap stuff. I think I got lucky with my Ryobi, but I take super good care of my tools. Go with Dewalt as I do think it is a superior 10" compared to the Hitachi. Until a particular miter saw jumps up and screams "MUST HAVE" I would spend my extra cash upgrading to Lithium tools (Milwaukee or Panasonic) and go cheap on a miter saw that cuts true. A $100 Ryobi or craftsman may work best for you if you don't crosscut all week long.
Back on track, spend a bit more on the Dewalt as it does appear to be a better saw. Sorry, I just love talking tools.
2007-09-22 15:35:21 · answer #2 · answered by Griff 5 · 1⤊ 0⤋
I have owned a Dewalt 10" miter for 4 years now and love it. I've built 2 large decks and done other projects and it still works like new. Dewalt is american and I would think replacement parts would be easier to get if needed. ( I have'nt yet) still on first blade.
I would buy the 12" if I had to do it over but, I'm very Happy with what I have.
2007-09-22 03:29:27 · answer #3 · answered by rich b 3 · 0⤊ 0⤋
The question is what will you be using this for. I have used DeWalt and still have one, I used Rigid, Ryobi and Hitachi. Also what will you be cutting sometimes the 10" is enough and sometimes you will need a 10" slider to do the job. I personally feel that a good 12" is better for me since I rarely cut anything wider than 8" If you will than a 10" slider should be your choice but for me a good 12" is most versatile. As far as brand names the only time you should be concerned about it if you will really abuse the tool. If it is a home use and you will take care of them go cheep with a 12" Ryobi about 100-150 dollars The same tool in DeWalt will set you back aditionlal 200 or more. Good Luck
2007-09-24 20:23:57 · answer #4 · answered by Derek 4 · 0⤊ 0⤋
Dewalt 10 Chop Saw
2016-11-04 03:06:26 · answer #5 · answered by ? 4 · 0⤊ 0⤋
I agree with above answer except I would get a Dewalt. Dewalt are the best tools made. The "bevel" refers to the tilt of the saw either left or right - to make a compound cut. A single bevel only tilts to the right so you have to turn the piece you are cutting around to make the other cut. Although the price you have for the Skil saw is a great price! If I had to choose between those 2 I would probably take the Hitachi.
2016-03-18 22:07:08 · answer #6 · answered by Anonymous · 0⤊ 0⤋
I personally like my Dewalt. It is eaily moved from site to site and the degree numbers are raised which means that they wil not wear away over time. In all fairness though, I have never used the Hitachi as I use my power tools a great deal and Dewalt brands serve my needs and have paid for themselves over the years.
2007-09-22 04:35:20 · answer #7 · answered by cameoanimals 4 · 0⤊ 0⤋
Ask your father in law if he would buy a Black & Decker Saw. That is what Dewalt is. Go with the Hitachi, it will last generations,and is more accurate.
2007-09-22 06:02:09 · answer #8 · answered by Don 6 · 2⤊ 0⤋
I've always found DeWalt much more reliable.
Definitely go for the 12" if you buying. It really comes in handy for those bigger projects like decks, playset, etc where you are cutting 4X4 and 6x6.
You can't go wrong with either brand though.
2007-09-22 07:55:32 · answer #9 · answered by Rick D 1 · 0⤊ 0⤋
No offense to you; your stepfather, or anyone else here; BRAND NAME choice is probably as personal as religion or Politics; certainly knowledge is gained through experience.
I use EVERYTHING; and considering that most components are outsourced in assembly/ parts structure/ and a TAG on a tool or appliance,,, so often all made in the same factory, it may be determined by use; features; warantee;serviceability;parts access; etc.
We all have FAVES certainly. I have a lot of YELLOW in my truck. Hitachi may work as well for anyone?
Steven Wolf
I do avoid OFF brands however such as CHICAGO
2007-09-22 03:46:13 · answer #10 · answered by DIY Doc 7 · 0⤊ 0⤋