I'm talking about a new semi-auto handgun
2007-09-20 10:16:09 · 14 answers · asked by Charles M 1 in Sports ➔ Outdoor Recreation ➔ Hunting
ALWAYS run a patch or a boresnake through the barrel prior to loading and firing. Make this a habit. There are a lot of good reasons for this.
A new gun will likely have some protective lubricant in the barrel and action. It may be dried and gummy or it may just be excessive. The best policy is to field strip the firearm, wipe it down well, lightly lube the action and clean the chamber and bore.
A properly stored gun will have had an oil soaked patch run down the bore prior to storage. A clean dry patch will pick up any excess oil in there and ensure proper firing.
I had a friend that took his old Browning lever action to the range, loaded it and when he pulled the trigger the barrel split open like a banana. Some insect had decided to make a home in there and the pressure split open the tube like a soda can. He wasn't hurt, but you can bet he will always check the bore first.
2007-09-20 10:55:33 · answer #1 · answered by DJ 7 · 2⤊ 0⤋
YES....Of course you should clean a new handgun before you shoot it. For that matter ANY new gun should be thoroughly cleaned before it's shot for the first time. Manufacturers could always leave metal flakes and residue that was created during the manufacturing process. Cleaning assures smooth function and prevents damage that could be a big deal and an expensive lesson later.Congratulations on your NEW Handgun!
2007-09-20 17:42:24 · answer #2 · answered by JD 7 · 4⤊ 0⤋
Always clean a new gun before you shoot it. Doesn't matter if it is a semi auto handgun, a shot gun or a rifle. Always clean first, then shoot.
2007-09-21 08:57:37 · answer #3 · answered by 1970 3 · 1⤊ 0⤋
Yes, new guns should be cleaned before using. Remove excessive packing grease and especially in the case of an auto loading pistol, clean and lube before using.
Best.
H
2007-09-20 21:27:14 · answer #4 · answered by H 7 · 2⤊ 0⤋
If it's new you may need to clean the film placed on the gun for storage, It's kinda like a plastic. Just make sure you don't clean off the bluing( rust prevention)
2007-09-20 17:25:05 · answer #5 · answered by lyger1970 3 · 2⤊ 0⤋
i would make sure that the barrel is clear. i bought a sks rifle at a gun show once and the whole gun was coated with grease and while i was wiping it down i realized the barrel was full of grease too. i doubt your handgun is like that but it won`t hurt to look.
2007-09-20 17:29:36 · answer #6 · answered by Phil Deese 5 · 1⤊ 0⤋
It is a good idea to clean it so you know what your starting point is from the git go. Sort of like checking under the hood on a new car; oil, antifreeze, wiper fluid, belts, yada. Anything that is touched by a human needs to be checked over.
2007-09-20 18:26:27 · answer #7 · answered by acmeraven 7 · 2⤊ 0⤋
I'd clean the chamber, never trust anyone outside of yourself with something like a clean gun.
2007-09-20 17:21:13 · answer #8 · answered by minnesotagrave 3 · 2⤊ 0⤋
Clean all guns before you fire them for the first time, and while you are cleaning them, inspect them for any problems or packing material that may interfere with proper, safe operation.
2007-09-20 23:44:10 · answer #9 · answered by Gray Wanderer 7 · 1⤊ 0⤋
I would clean and lube any gun I just purchased prior to shooting it. I bought several brand new guns, all were drier then popcorn farts out of the box the action needed lubrication.
I've bought surplus weapons that had been packed in Cosmoline, and you would NEVER fire one of these pigs without degunking it 1st!!
2007-09-20 17:25:55 · answer #10 · answered by Anonymous · 5⤊ 0⤋