I am in the process of building a Hi-End stereo. I Will be starting with 3 Carver Pro Amps all 2 channel. 1 Caver pro XI 2600 rated at 500 x 2 watts per channel at 8 ohms 0.5 TDH.
1 Carver Pro XI 1850 rated at 370 x 2 at 8ohms, and 1 Carver pro ZR 1600 rated at 350 x 2 at 8oms. Going with 1 Sunfire True Signature Subwoofer 2700 watts or 2 Sunfire D12Subwoofers 1000watts each. This is the start. If I can talk my buddie out of his new Carver Digital's HTP 9.1 Home Theater Processor . Then I need a nice Pre Amp to run everything. Any suggusions?
2007-09-16 10:04:34 · 1 answers · asked by wirelesscards 1 in Consumer Electronics ➔ Home Theater
Hi Well since you are going to have Carver Power Amps. wouldn't it be better to have a Carver or Sunfire Preamplifier that will match the Power Amps ? Why would you need 3 two channel Power Amps for Stereo ?
Two Subwoofers are always better than one to balance the low bass in the room.
EDIT. I did have a Carver 2 channel Preamplifier and a 600 watt per channel Carver Power Amplifier which i purchased in 1984.But i replaced them in the late 90s with a better system. But i am still using the Carver C9 Sonic Hologram Generator between my current Preamp.and Power Amp.to give me a three-dimensional sound stage.
Could you let me know why you wan't 3 Amps. for
stereo,also what will you use for your main Source ? Thanks.
2007-09-17 01:14:53 · answer #1 · answered by ROBERT P 7 · 0⤊ 0⤋