the signal by using the channel up button now I have audio but no picture and I don't know how to get it back? Can anyone help me?
2007-09-11 02:52:37 · 4 answers · asked by seashell 6 in Consumer Electronics ➔ TVs
Hi
Don't panic , I don't think you have messed up the Sat box by pushing channel up !
Assuming you have checked the volume & mute on the box.
Probably the box has " locked up " on the audio side of things, just unplug the box from the mains , count to 10 slowly , plug it back in & switch on , let all the lights flick & flash , the audio should come back on .
good luck hope this helps
2007-09-11 03:04:01 · answer #1 · answered by Richard B 2 · 0⤊ 0⤋
Be warned, I don't really know what I'm talking about. But since I have satellite TV, I thought I'd ask this: is it possible you have your remote tuned to "tv" instead of "satellite"? If you do, that might explain it. You'd be changing the dedicated channel (ch 3, usually).
2007-09-11 10:03:13 · answer #2 · answered by suenami_98 5 · 0⤊ 0⤋
check the cables going into the back of tv set and all others depends on which service provider you have and type of receiver make sure TV is on proper station also can save you a service call
2007-09-11 10:02:59 · answer #3 · answered by Ive gone diving 4 · 0⤊ 0⤋
Sweety it would be better if you contact a technician. They will help you on the phone. You want to make sure that it is working like it should. They should be working 24 hrs. Take care and goodluck
2007-09-11 19:42:34 · answer #4 · answered by merali-silda 5 · 0⤊ 0⤋